Guide
Pixels, DPI and print size, explained
Forms ask for "300 DPI", printers ask for "high resolution", and a photo that looks sharp on your phone comes out blurry on paper. It all makes sense once you separate two ideas: the pixels in the photo, and how big you print them.
Pixels: what's actually in the photo
A digital photo is a grid of tiny coloured squares called pixels. A photo described as 4000 × 3000 has 4000 pixels across and 3000 down, 12 million pixels in total, or 12 megapixels. The pixel size is the only thing that decides how much detail a photo holds.
DPI: how tightly the pixels are printed
DPI means dots per inch (PPI, pixels per inch, is the more accurate term, but most people say DPI). It's an instruction to a printer: "print this many pixels in every inch of paper". It's stored as a single number in the file and changes nothing else.
That's why changing DPI on its own doesn't change how a photo looks on screen, and doesn't change the file size much either. A 1200 × 1200 photo set to 72 DPI and the same photo set to 300 DPI are identical on a screen. They only differ when printed: the first would print 16.7 inches wide, the second 4 inches wide.
The formula
Print size in inches = pixels ÷ DPI
Or, to work out how many pixels you need: pixels = inches × DPI. For centimetres, divide by 2.54 to get inches first.
For example, a 2 × 2 inch passport photo at 300 DPI needs 2 × 300 = 600 × 600 pixels. A 35 × 45 mm photo is about 1.38 × 1.77 inches, so at 300 DPI it needs about 413 × 531 pixels.
What DPI should you print at?
- 300 DPI is the standard for photo prints you'll hold in your hand. At normal reading distance it looks perfectly sharp.
- 200–250 DPI still looks good for most photos, and is fine if you're slightly short of pixels.
- 150 DPI is the minimum for posters and larger prints viewed from a step back.
- 72 or 96 DPI is a leftover screen default and means nothing for on-screen use.
Pixels needed for common print sizes (at 300 DPI)
| Print size | Pixels needed | Megapixels |
|---|---|---|
| 2 × 2 in (US passport) | 600 × 600 | 0.4 |
| 35 × 45 mm (UK, EU, Australia passport) | 413 × 531 | 0.2 |
| 4 × 6 in (10 × 15 cm) | 1200 × 1800 | 2.2 |
| 5 × 7 in | 1500 × 2100 | 3.2 |
| 8 × 10 in | 2400 × 3000 | 7.2 |
| A4 (210 × 297 mm) | 2480 × 3508 | 8.7 |
| A3 (297 × 420 mm) | 3508 × 4961 | 17.4 |
A typical 12-megapixel phone photo (4000 × 3000) prints sharply at 300 DPI up to about 13 × 10 inches, which is larger than A4.
Can I just increase the DPI to make a photo sharper?
No. Raising the DPI number without adding pixels only makes the print smaller. Enlarging the pixel size (upscaling) doesn't add real detail either: the software has to invent the new pixels, so the result looks soft. If a photo is too small for the print you want, the best fix is to print it smaller or find the original, larger file.
A form asks for "300 DPI" — what do I do?
Some online forms check the DPI value stored in the file even though it doesn't affect the image. Set the pixel size they ask for, then set the DPI in the resizer under Print DPI (for JPG files). If they also give a file size limit, set that too: all three can be applied at once.